๐Ÿ”จ

Panel Calculator

Calculate running metres and number of boards for panelling

mยฒ
cm
๐Ÿ‡ฉ๐Ÿ‡ฐ All calculations are based on Danish rules, rates, and currency (DKK). This calculator is translated for convenience but applies exclusively to Denmark.

Calculate panels for walls and ceilings

Our panel calculator helps you determine running metres and boards for panelling work. Suitable for all panel types including tongue-and-groove, bead board and MDF panels.

Panel types

Common types include bead board (typically 12 cm wide), profile boards (10-15 cm), clapboard (15-20 cm) and MDF panels. Standard length is 3 metres.

Installation

Panels are mounted on battens (furring strips) at about 60 cm spacing. Boards can be nailed or clipped. Start from a corner and work systematically.

Frequently Asked Questions

What is the standard panel width?

The most common panel width is 12 cm (bead board). Profile boards come in 10-15 cm widths. Clapboards are typically 15-20 cm wide. Visible width is slightly less than actual width due to tongue and groove.

How do I calculate running metres?

Divide the total wall area (mยฒ) by the panel width (in metres). E.g. 20 mยฒ / 0.12 m = 167 running metres. Add 5-10% extra for waste.

How long is a standard panel board?

Standard panel board length is 3 metres. Also available in 2.4 m, 3.6 m and 4.2 m. Choose length based on room height or wall width to minimise waste.

Sources